DVD Multi Region Codes - Fix

[ripper121]

To enable multi-region playback on your dvd player try all of the following three methods until you achieve success, they are unlikely to harm or cause any damage to your dvd player, though you are held entirely responsible for any damage resulting from this process, or any laws or ammendments that are infringed, this is not my responsibilty, and you must follow these steps at your own risk after reading and understanding the previous agreement.

1. Press "Setup" on the remote, and highlight "TV Aspect"

2. Place the cursor on "16:9 Wide" and enter the following code on the Remote

3. 1397139

4. Press "Enter"

1) Power on player with no disc in tray
2) Press PAUSE
3) Key in 314159 (The display will now show "CODE 00")
5) Select your chosen region. For multi-region, select 0
6) Press PAUSE again
7) Power off player
8) Wait, turn it on, and away you go.

1) Power on player with no disc in tray
2) Wait for display to show "No Disk"
3) Press STOP
4) Press PAUSE
5) Key in 314159 (The display will now show "CODE 00")
6) Select your chosen region. For multi-region, select 0
6) Press PAUSE again
7) Power off player
8) Wait, turn it on, and away you go.

This should work for all LG(R) model dvd players, but may work on similar brands as well

[Rocol]

Or, to be on the safe side, check for any hacks to your actual DVD Player Model here .....

http://www.dvd.reviewer.co.uk/info/m...n/hackable.asp (http://www.dvd.reviewer.co.uk/info/multiregion/hackable.asp)