Evolution X

[Tingle]

When i go to settings under the catogory Network the "Type" area is empty and the "IP" right under reads 0.0.0.0 how do i correct this. I can not get flashxp to connect to my xbox no matter how much i try:cussing:

[No_FeaR]

how is your box networked to your pc?hub,router etc..

[CyBeR XxX]

try with the latest evolution x dashboard version! download it here http://www.biteable.pwp.blueyonder.co.uk/

[Tingle]

Im networking it using the Compaq Ipaq Hub. I am using the latest version of Evlolution x

[CyBeR XxX]

if ur using winxp u can easily connect with the fallowing options
pc ip
192.168.100.2
255.255.255.0
192.168.100.1

xbox
192.168.100.3 if not try with 1 instead of 3
255.255.255.0
192.168.100.1
ok just to make sure reburn evox but b4 burning it open evox.ini with a notepad (it should open with a double click n replace the network section with this
[Network]

SetupNetwork = Yes
StaticIP = Yes
Ip = 192.168.100.3
Subnetmask = 255.255.255.0
Defaultgateway = 192.168.100.1
DNS1 = 0.0.0.0
DNS2 = 0.0.0.0

and this section

[FTP]

Enable = Yes
Password = xbox
IGR = Yes

[RDTOOLS]

Enable = Yes
Name = XBOX
IGR = Yes

now save the changes n burn the disc again, make sure u change the ip on flash fxp for either 192.168.100.1 or 192.168.100.3 user xbox pass xbox port 21

[Tingle]

Thanx but im having some trouble burning Evox Now the Xbox won't read the disc nemore. How do i make the proper iso for it??

PS sorry for bothering you guys lol:rolleyes:

[CyBeR XxX]

np dude! dont make an iso! doesnt work that well, read my xbox backup tutorial to learn how to burn xbox games with the best software (record now max) i provided a link to download the demo version wich is actually full for 30 days, give it a try n plz let me know if it worked :)

[Tingle]

No luck ive tried that i can't get it to run in my xbox. how do i load the bios for the new Evolutionx?? i can't seem to find them newhere would u mind giving me a step by step:(

[archfantom]

HOw to get more money?

[CyBeR XxX]

Download the latest bios here http://www.biteable.pwp.blueyonder.co.uk/ put them on the bios folder located on c:/bios if u already replaced the original xbox dashboard with evox also u did know xbox cant read cdrs right? just the samsung drive but u need to be so damn lucky to get 1 anyways try burning it to a cdrw read my xbox backup tutorial to c how u can use record now max, after putting the bios on the bios folder, reboot ur xbox n go to system utilitys n go to flash bios ur new bios should be there select it n hit a (note u need to have a mod chip that allows u to flash bios like lcp mod chip) then hit y ur xbox will turn off, turn it on again n done :)

@ archfantom plz do not spam the board! you have a warning :mad:

[Tingle]

k i have th edisc now and everything ready but now when i connect it conects but nothing shows up then it says connection lost any ideas?

[doughboy]

Are you using a cross over cable??

[CyBeR XxX]

try my setting (use flash fxp ftp client) n play around with the last number of the ip address till u get it. ;)

[Tingle]

425 Can't open data connection to 24.43.206.47:62127 I get this error now:| im really sorry for being a pain in the A$$ but i need help.

[CyBeR XxX]

M8 i can't help you if u dont give me details, how are u trying to connect to ur xbox?

[Gio' Power]

i've done refear to this tutorial and i hadn't problemz:

http://www.xbox-scene.com/articles/network.php

however remember u have to use a crossover cable only if u directly connect the xbox to the pc; u have to use a direct cable with an hub and u have to set the hub to use this type of cable.

if u don't know the type u have go here:

http://edu.supereva.it/giopower/vg/xbox_tutorials/xbox_tut001.html

hope this could be usefull4u.

ps: i'm using a notebook to connect (without an hub); i've seen u have to turn on the pc before and waiting for it to enter in the operating system and then u can turn on the xbox with the cable connected if u want its gonna work...